Lock - Komatsu PW98MR-10 Operation & Maintenance Manual

OPERATION

LOCK

Lock position
Always lock the following places:
(1) Operator's cab door
(2) Toolbox and grease pump storage cover
(3) Engine hood
(4) Dirt cover
(5) Battery inspection cover
(6) Air conditioner fresh air filter storage cover
REMARK
Use the starting switch key to lock and unlock all these places.
METHOD FOR OPENING AND CLOSING COVER WITH LOCK
METHOD FOR OPENING COVER WITH LOCK
1.
Insert the key into the key slot.
2.
Turn the key counterclockwise and open the cover by pull-
ing the cover handle.
Position (A) position: OPEN
Position (B) position: LOCK
METHOD FOR LOCKING COVER WITH LOCK
1.
Close the cover and insert the key into the key slot.
2.
Turn the key clockwise and remove it.
MACHINE OPERATIONS AND CONTROLS
WENAM00061
RKA48830
RKA50480
RKA50490
3-191