Komatsu PW98MR-10 Operation & Maintenance Manual page 226

Wheeled excavator
Table of Contents

Advertisement

MACHINE OPERATIONS AND CONTROLS
7.
Slowly activate the pedal of the positioning arm forward (E)
to extend it completely. Activate the pedal to the full extent
and hold it in position for 30 seconds. Retract the arm
completely and maintain it in position (F) for 30 seconds.
8.
Repeat the operation of step from 5 to 7 for 5 minutes.
9.
Deactivate the camera and check that the indicator light
(6) of the hydraulic oil temperature indicates the correct
value.
Display (A) when temperature is proper: Caution lamp
background (C) is blue.
Display (B) when temperature is low: Caution lamp
background (C) is white.
If hydraulic oil temperature caution lamp (6) displays low
temperature, repeat steps 6 to 10 until the lamp displays
the proper temperature.
10. Check that engine coolant temperature caution lamp (1)
displays the proper temperature.
Display (A) when temperature is proper: Caution lamp
background (C) is blue.
Display (B) when temperature is low: Caution lamp
background (C) is white.
If engine coolant temperature caution lamp (1) displays
low temperature, perform warm-up operation until the
proper temperature is displayed.
For detail, see "METHOD FOR ENGINE WARM-UP OP-
ERATION (3-154)".
11. Check that hydraulic oil temperature caution lamp (6) and
engine coolant temperature caution lamp (1) display the
proper temperature, then check that all the caution lamps,
pilot lamps, and gauges on the machine monitor are in the
following conditions.
Charge level caution lamp (7): OFF
Engine oil pressure caution lamp (8): OFF
Engine preheating pilot lamp (9): OFF
Engine coolant temperature gauge (10): Indicator in
green range
Engine coolant temperature caution lamp (1): proper
temperature
Hydraulic oil temperature gauge (11): Indicator in
green range
Hydraulic oil temperature caution lamp (6): proper
temperature
Fuel gauge (12): Indicator in green range
Fuel level caution lamp (13): Displays appropriate lev-
el
12. Check for abnormal exhaust gas color, noise, or vibration.
3-158
WENAM00061
OPERATION
RKA48670
RKA48680
RKA48990

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents