MACHINE OPERATIONS AND CONTROLS
METHOD FOR OPERATIONS AND CHECKS BEFORE STARTING ENGINE
k
k
•
When starting the engine, check that the lock lever is
securely at LOCK position. If the lock lever is not
locked securely and the control levers or control pedal
are touched when the engine is started, the machine
may move unexpectedly, and this may lead to serious
personal injury or death.
•
Do not touch the left (C) and right (D) switches of the
joysticks to prevent the neutral detection system from
recognising the position derived from shifting as that
of neutral.
1.
Check that battery disconnect switch (S) is in ON position
(I).
2.
Check that lock lever (1) is at LOCK position (L).
3.
Check that all control levers and control pedals are at
NEUTRAL (N) position.
If the control levers and control pedals are not being
touched, they will be at NEUTRAL (N) position.
4.
Check that the driving direction selection switch is in neu-
tral (N).
3-146
WARNING
WENAM00061
OPERATION
RKA48660
RKA48650
RKA54630