FOREWORD
DIRECTIONS OF MACHINE
(A) Front
(B) Rear
(C) Left
In this manual, the terms front, rear, left, and right refer to the travel direction as seen from the operator's seat
when the operator's seat is facing the forward direction.
VISIBILITY FROM OPERATOR'S SEAT
The visibility of this machine required by visibility standards (ISO 5006) are shown in the drawing below.
Proximity visibility
The figure below shows a visibility from the machine at a spot 1.0 m away from outside the machine and 1.5 m
above the ground.
(D) Right
(E) Operator's seat
WENAM00061
INTRODUCTION
RKA36001
1-9