Komatsu PW98MR-10 Operation & Maintenance Manual page 284

TRANSPORTATION
Y= 20°–50°
4.
Protect the end of the exhaust pipe (5).
PROCEDURES FOR UNLOADING MACHINE
Perform unloading of the machine on a firm, level ground.
Maintain a safe distance from the road shoulder.
1.
Apply the trailer brakes securely, then put chocks (1) under
the tires to prevent the trailer from moving.
2.
Set right and left ramps (2) parallel to each other and
equally spaced to the right and left of center (3) of the trail-
er. Make angle of installation (4) a maximum of 15 deg.
If the ramps bend a large amount under the weight of the
machine, put blocks under the ramps to prevent them from
bending.
3.
Remove the chains and wire ropes fastening the machine.
4.
Start the engine. Warm the engine up fully in cold weather.
3-216
RKA52420
WENAM00061
OPERATION
RKA52380