Komatsu PW98MR-10 Operation & Maintenance Manual page 419

ATTACHMENTS AND OPTIONS
Operate the breaker operation switch.
The breaker operates.
METHOD FOR OPERATING MACHINE WHEN WORKING MODE IS NOT IN
BREAKER MODE
If the breaker mode is not indicated as the working mode, enter it according to the following procedure.
1.
Press working mode selector switch (1).
The screen changes to "working mode" selection screen.
2.
Press working mode selector switch (1) or press switches
F3 or F4 to select Breaker Mode B.
Breaker mode B is highlighted in yellow.
3.
With breaker mode B highlighted in yellow, enter the selec-
tion by performing either of the following operations.
• Hold down working mode selector switch (1).
• Press switch F6.
• To leave as it is for 5 seconds.
REMARK
If you press switch F5, the screen returns to "Working
Mode" selection screen without changing to the breaker
mode.
CHECK POINTS WHEN USING BREAKER
• Is the working mode set to B mode?
HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
WENAM00061
RKA48504
RKA48159
6-17