Komatsu PW98MR-10 Operation & Maintenance Manual page 42

GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
Set the gear selection switch to neutral (N).
Engage the boom swing control pedal.
Set the lock lever to LOCK position (L).
Turn the starting switch to OFF position (A).
Remove the starting switch key, lock the cab door and the front
window and always take the key with you and keep it in the
specified location.
EMERGENCY EXIT FROM OPERATOR'S CAB
• If it should be impossible to open the door of the cab, break the window glass with the hammer supplied
and use the window as an emergency escape.
For details, see "EMERGENCY ESCAPE HAMMER (3-114)" in this manual.
• When escaping, remove all the pieces of glass from the window frame first and be careful not to cut your-
self on the glass. Be careful also not to slip on the broken pieces of glass on the ground.
ELECTROMAGNETIC INTERFERENCE
When the machine is operating close to a source of high electromagnetic interference, such as a radar station,
some abnormal phenomena may be observed.
• The display on the monitor panel may behave erratically.
• The warning buzzer may sound.
2-22
WENAM00061
SAFETY
RKA48490