Komatsu PW98MR-10 Operation & Maintenance Manual page 125

OPERATION
Operations with the camera screen when the travelling on street mode is active
The following is the method of changing the camera image display on the monitor.
• When the forward drive is engaged (F) or the machine is in neutral (N) the screen QQ is displayed.
• When the reverse gear is engaged (R) the full screen NN is displayed. Camera image full-screen display
NN is displayed on the entire screen.
REMARK
The full screen display can be disabled in the menu "Screen adjustment". For details, see "SCREEN ADJUST-
MENT (3-78)"
Other mode operations while displaying camera image display screen
Even while the camera image display screen is displayed, it is possible to operate the following modes.
• The air conditioner can be operated.
When the air conditioner switch is operated, the screen
switches to "A/C Setting" screen. When the screen
switches to "A/C Setting" screen, press switch F6 to return
to the camera image display screen. In addition, if no oper-
ation is performed for 5 seconds after the screen switches
to "A/C Setting" screen, the screen automatically returns to
the camera image display screen.
For details of the air conditioner operation, see "HANDLE
AIR CONDITIONER (3-198)".
• Hold down working mode selector switch.
For the working mode selector switch, see "WORKING
MODE SELECTOR SWITCH (3-46)".
At this time, the working mode display at the top right of
the monitor screen is highlighted in yellow for 2 seconds,
then returns to blue.
WENAM00061
EXPLANATION OF COMPONENTS
RKA48190
3-57