Komatsu PW98MR-10 Operation & Maintenance Manual page 182

EXPLANATION OF COMPONENTS
3)
Set lock (2) to FREE position (F) and press the upper
side of the glass.
4)
Turn lock (2) 90 deg. counterclockwise to LOCK posi-
tion (L) to fix the upper side of the glass.
NOTICE
When stowing the glass, lock it securely and
check that there is no play. If there is play or the
lock is not properly applied, there is danger that
the glass may fall.
5)
When removing the bottom window from the stowing
position, perform the stowing procedure in the reverse
order.
SLIDE DOOR
k k
• Be sure to check that the sliding door is locked in po-
sition both when it is open and when it is closed.
• Always place the machine on a level ground when
opening or closing the door.
Avoid opening or closing the door on the ramps or
trailer platform because the operating effort may sud-
denly change.
• Be careful not to get your hands caught between the
front pillar or center pillar.
• If there is anyone inside the cab, warn him/her before
opening or closing the door.
When opening the door, pull door handle (1), then pull the door to the front.
When closing the door, pull door handle (1) back to unlatch lock (2), then pull the door to the front.
EMERGENCY ESCAPE HAMMER
• If it is necessary to break the window glass with the hammer, be extremely careful not to get injured
with scattered pieces of broken glass.
• To prevent injury, remove the broken pieces of glass remaining in the frame before escaping
through the window. Be careful also not to slip on the broken pieces of glass.
3-114
CAUTION
k k
CAUTION
WENAM00061
OPERATION
RKA54120