Komatsu PW98MR-10 Operation & Maintenance Manual page 117

OPERATION
REMARK
When the engine is started, the selected speed remains the
same as the one set before the machine stopped.
During loading and unloading operations from a trailer, never
use the speed increase switch and always use the speed "CR".
Before switching the speed from "LO" to "HI" and vice-versa,
the machine must be at a standstill with the service brake
pressed.
The passage from "CR" to "LO" can be carried out at any time.
If the service brake is not pressed correctly, the warning indica-
tor shown in the figure is displayed on the monitor.
REMARK
Each time the travel speed switch is pressed, the mode will be
displayed enlarged on the monitor display and, after two sec-
onds, it will return to the standard screen.
WENAM00061
EXPLANATION OF COMPONENTS
RKA48152
RKA52150
RKA48172
RKA48162
3-49