SAFETY LABELS
(i) Warning danger of falling objects
•
Do not operate where a danger of falling objects exists.
Consult your dealer for fitting of FOPS (FALLING OBJECT
PROTECTIVE STRUCTURE) protection.
(2) Control levers operational function diagram
(21D-00-41210)
•
In order to prevent an accident resulting in injury or death
caused by error-operation, confirm the machine motion
and indicated operating pattern, when operating machines.
Pay attention to the circumference and operate slowly
when confirming the machine motion.
•
Carefully read the manual before working or moving with
the machine and make sure you know all the controls.
•
Switch off or obscure the work lights when travelling.
(3) Combined safety information label
(21D-00-41220)
Detailed explanations of the content of each label are as fol-
lows:
2-8
WENAM00061
SAFETY