Komatsu PW98MR-10 Operation & Maintenance Manual page 154

EXPLANATION OF COMPONENTS
• When you press switch F6 after inputting the ID which
is not registered to "Operator ID Change" screen, a
message is displayed below and the screen returns to
"Monitor Setting" menu screen.
In this case, the identified ID is not changed.
• On "Operator ID Change" screen, if no switch is oper-
ated for more than 30 seconds, the screen automati-
cally changes to "Monitor Setting" menu screen.
In this case, the identified ID is not changed.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITHOUT SKIP
When the operator identification function is available without
SKIP, the identified ID number is not displayed in "Operator ID"
column of "Monitor Setting" screen.
1.
Select "Operator ID" (5) on "Monitor Setting" menu screen,
then press switch F6 for 1 second.
2.
"Operator ID Change" screen is displayed.
• Input the already registered ID on "Operator ID
Change" screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to "Monitor Setting" menu screen.
3-86
WENAM00061
OPERATION