Komatsu PW98MR-10 Operation & Maintenance Manual page 415

ATTACHMENTS AND OPTIONS
6.
Turn the starting switch to OFF position (A).
7.
Open dirt cover (1).
8.
Lock securely with hood support lever (2).
9.
Loosen bolt (3) and remove plate (4) on the top of oil filler
port (F).
10. Remove the cap of oil filler port (F) gradually to release the
internal pressure.
11. Remove the cap of oil filler port (F).
12. Remove the hoses on the attachment side. Install the
plugs to outlets (2 places).
The plugs are used to prevent the attachment from making
incorrect operation caused by mixing in of foreign matter.
After the plugs are correctly installed, store the attach-
ment.
13. Pull out the mounting pins (2 places), remove the attach-
ment, then install the bucket.
For the installation procedure of the bucket, see "METHOD
FOR REPLACING AND INVERTING BUCKET (3-186)".
After installing the bucket, check the oil level in the hydraulic tank.
HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
WENAM00061
6-13