Komatsu PW98MR-10 Operation & Maintenance Manual page 163

OPERATION
The switch is used to set the axle locking in two modes.
Press (a) to select the axle locking mode.
Release the switch and press (b) to use the automatic axle
locking mode.
Each time the axle locking mode is selected, the state is dis-
played on the monitor.
If it is operating in automatic mode, the axle remains unlocked
until the working brake is engaged. For details, see "BRAKES
PEDAL (3-106)"
PARKING BRAKE SWITCH
NOTICE
• Do not engage the parking brake when the machine is moving.
• The parking brake is engaged when the lever for locking the controls in on LOCK (locked).
The switch is used to engage and disengage the parking brake.
When engaged, also the machine controls are locked.
(a)
Parking brake engaged and machine controls locked.
(b)
Parking brake disengaged and machine controls unlocked.
The engagement of the parking brake is displayed on the moni-
tor.
Each time that it is engaged, the machine monitor displays the
icon (a) enlarged for 2 seconds.
After 2 seconds the monitor returns to a normal display.
F/N/R SWITCH
The switch is located on the right joystick and is used to select
the translation direction.
(F)
Forward
(N)
Neutral
(R)
Reverse
Each time that a direction of travel is engaged, the machine
monitor displays the selected direction (a) enlarged for 2 seconds.
After 2 seconds the monitor returns to a normal display.
CIGARETTE LIGHTER
The cigarette lighter is used to light cigarettes.
When the cigarette lighter is pushed in, it will return to its origi-
nal position after several seconds, so pull it out to use it.
If the cigarette lighter is removed, the socket can be used as an
85 W (24 V x 3.5 A) power source.
NOTICE
This cigarette lighter is for 24 V. Do not use as a power
supply for 12 V equipment.
WENAM00061
EXPLANATION OF COMPONENTS
RKA48470
RKA48480
RKA50370
3-95