Komatsu PW98MR-10 Operation & Maintenance Manual page 181

OPERATION
6.
Check that lever (B) is securely at LOCK position.
• If the arrow on lock case (F) matches the position of
the arrow on lever (B), the lock is engaged. Check vis-
ually.
• If the arrow on lock case (F) does not match the posi-
tion of the arrow on lever (B), the lock is not engaged.
Repeat the operation in step 5 to engage the lock.
Removal of front window (lower side)
1.
Incline the steering column, open the front window (top
side), then hold the grip (1), pull it upwards and remove
the lower side window.
REMARK
If sand or dust is collected at the bottom of the front win-
dow (lower side), it will be difficult to remove the window. In
addition, when stowing, the sand and dust stuck to the
glass will be carried inside the cab. To prevent this, clean
area (A) before removing.
2.
After removing the bottom window, store it at the rear of
the operator's cab and lock it securely with lock (2). The
procedure for stowing is as follows.
1)
Set it with the protruding part of grip (1) on the glass
on the inside and insert the bottom of the glass into
the groove in seat (3).
2)
Insert the top right of the glass into the groove in seat
(4).
WENAM00061
EXPLANATION OF COMPONENTS
3-113