Komatsu PW98MR-10 Operation & Maintenance Manual page 142

EXPLANATION OF COMPONENTS
1.
Select an attachment to change its name on "Attachment
Setting" screen, then press switch F6.
2.
The "Attachment Name Setting" screen is displayed.
On the "Attachment Name Setting" screen, you can per-
form the following operations with switches F1 to F6.
F1: "CLEAR" Clears all the letters. (If some letters are left.)
F1: "DEFAULT" Displays the initial name. (If all the letters
are deleted.)
F2: Moves to the right letter.
F3: Moves to the next alphabet, numeral, or symbol.
F4: Moves to the previous alphabet, numeral, or symbol.
F5: Returns the screen to "Attachment Setting" screen without changing the name.
F6: Enters the change and returns the screen to "Attachment Setting" screen.
It is not possible to change the name for "No Attachment" setting.
Changing "2-Way Attachment Oil Flow Rate Setting"
1.
Select an attachment to change its oil flow on "Attachment
Setting" screen, then press switch F2.
2.
The "2-Way Attachment Oil Flow Rate Setting" screen is
displayed.
On the "2-Way Attachment Oil Flow Rate Setting" screen,
you can perform the following operations with switches F3
to F6.
F3: Decreases the oil flow rate by 1 level.
F4: Increases the oil flow rate by 1 level.
F5: Returns to the "Attachment Setting" screen without
changing the oil flow rate.
F6: Enters the oil flow setting and returns to the "Attach-
ment Setting" screen.
(X): Present oil flow setting
(Y): Min. oil flow for adjustment
(Z): Max. oil flow for adjustment
It is not possible to change the oil flow for "No Attachment" setting.
3-74
WENAM00061
OPERATION