Komatsu PW98MR-10 Operation & Maintenance Manual page 323

MAINTENANCE
Density (%)
• Coolant is toxic. When opening the drain valve, be careful not to get coolant on you. If it gets in
your eyes, flush your eyes with large amount of fresh water and see a doctor immediately.
• When handling the cooling water containing coolant that has been drained during changing the
coolant or repair of radiator, contact your Komatsu distributor or request a qualified company to
perform the operation. Coolant is toxic, so never pour it into drainage ditches or drain it onto the
ground surface.
Non-Amine Engine Coolant (AF-NAC) is already diluted with distilled water, so it is not flammable. (For dilution
water, see "HANDLE OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC (4-4)").
Check the density with a coolant tester.
Prepare a container whose capacity is larger than the specified coolant volume to catch drained coolant.
Prepare a hose to use when filling with coolant and water.
1.
Stop the engine.
2.
Open engine hood (1).
3.
Lock securely with hood support lever (2).
4.
Remove cover mounting bolt (3) (3 places) and remove
undercover (4).
5.
Remove center cover (5) and inspection cover (6).
30 36 41
k k
WARNING
WENAM00061
MAINTENANCE PROCEDURE
46 50 54 58 61 64
4-19