Komatsu PW98MR-10 Operation & Maintenance Manual page 144

EXPLANATION OF COMPONENTS
4.
When countdown reaches 0, the engine stops and the
screen changes to the Auto Idle Stop in Operation screen.
5.
To prevent battery discharging, turn off unnecessary
switches.
REMARK
While the auto idle stop is activated, only the engine is
stopped and the machine monitor, inverter, etc., as well as
the electrical components including the air conditioner, ra-
dio, lamps, and wipers keep their states before the engine
is stopped.
6.
To prevent causing flat battery, turn the starting switch to OFF position.
7.
When restarting the engine, turn the starting switch as usual.
REMARK
While the auto idle stop function is ON, the number of the times
that the engine was stopped when it was not at low idle (the
engine speed is 1400 rpm or higher) is displayed as "L01" at
and after 1000 and as "L03" at and after 2000 rpm on the moni-
tor.
MAINTENANCE SCREEN SETTING
Each item of this menu (c) is used for displaying and setting the notification relevant to maintenance.
The items on "Maintenance" display are as follows.
A
Air Cleaner Clean or Change
Coolant Change
Fuel Prefilter Change
Engine Oil Change (*1)
Engine Oil Filter Change (*1)
Hydraulic Tank Breather Change
Fuel Main Filter Change
Hydraulic Oil Filter Change
Swing Machinery Case Oil Change
Transmission Oil Change
Axle Oil Change
3-76
B
-
-
500
500
500
1000
1000
1000
1000
1000
1000
WENAM00061
OPERATION
RKA48270
RKA48280
RKA48290