Komatsu PW98MR-10 Operation & Maintenance Manual page 215

OPERATION
5.
Insert the key into starting switch (2) and turn it to ON posi-
tion (B).
• If a password is set, the input display screen will be in-
dicated on the monitor screen. On the input display
screen displayed on the monitor, input the password
and push input confirmation switch F6 (3).
REMARK
Contact your Komatsu distributor for details of the
method of setting, changing, or canceling the pass-
word.
• If inputting ID number for operator identification func-
tion (with SKIP) is set, "ID number input" screen is dis-
played on the monitor when the starting switch is
turned to ON position. When "ID number input" screen
is displayed on the monitor, input the ID number and
press input confirmation switch F6 (3).
For detail, see "WHEN OPERATOR IDENTIFICATION
FUNCTION IS AVAILABLE WITH SKIP (3-84)".
REMARK
Contact your Komatsu distributor for details of the
method of setting, changing, or cancelling the operator
identification function.
6.
Perform the following inspection on the machine monitor.
1)
The buzzer sounds for approximately 2 seconds and
the following caution lamps light up for approximately
2 seconds.
• Charge level caution lamp (4)
• Engine oil pressure caution lamp (5)
If any caution lamp does not light up or the buzzer
does not sound, there is probably a failure in the moni-
tor, so ask your Komatsu distributor for repair.
MACHINE OPERATIONS AND CONTROLS
WENAM00061
RKA48950
3-147