Komatsu PW98MR-10 Operation & Maintenance Manual page 164

EXPLANATION OF COMPONENTS
ATTACHMENT 1 PROPORTIONAL SWITCH
The 1st-line attachment proportional switch is on the right PPC
valve lever and it is used to operate the attachment.
For handling of the 1st-line attachment proportional switch, see
"ATTACHMENT 1 PROPORTIONAL SWITCH (6-10)".
ATTACHMENT 2 PROPORTIONAL SWITCH
The 2nd-line attachment proportional switch is on the left PPC
valve lever and it is used to operate the attachment.
For handling of the 2nd-line attachment proportional switch,
see "ATTACHMENT 2 PROPORTIONAL SWITCH (6-10)".
BREAKER OPERATION SWITCH
The breaker operation switch is on the right PPC valve lever
and it is used to operate the breaker.
For handling of the breaker control switch, see "BREAKER OP-
ERATION SWITCH (6-10)".
BLADE/OUTRIGGERS CONTROL SWITCH
The switch is located on the right joystick and is used to switch
the controls of the lifting boom to the blade/outriggers controls.
When the blade/outriggers mode is active, the icon (a) is dis-
played on the machine monitor for 2 seconds and it is possible
to control the blade/outriggers selected, whose indicator lights
(b) become green. For details about the blade/outriggers selec-
tion, see "BLADE/OUTRIGGERS SELECTOR SWICTH (3-53)".
3-96
WENAM00061
OPERATION
RKA48500
RKA48510
RKA48504
RKA48502