Komatsu PW98MR-10 Operation & Maintenance Manual page 229

OPERATION
For the additional equipment, select the right working
mode.
16. Deactivate the camera and check that the indicator light
(6) of the hydraulic oil temperature (6) indicates the correct
value.
• Display (A) when temperature is proper: Caution lamp
background (C) is blue.
• Display (B) when temperature is low: Caution lamp
background (C) is white.
If the caution lamp is not displaying the proper tempera-
ture, repeat the work equipment operation in step 6) until
the lamp displays the proper temperature.
If hydraulic oil temperature caution lamp (6) displays the proper temperature, the hydraulic equipment warm-up
operation is completed.
After checking that hydraulic oil temperature caution lamp (6) displays the proper temperature, perform the op-
eration after completion of the warm-up operation.
METHOD FOR OPERATION AFTER COMPLETION OF WARM-UP OPERATION
1.
Deactivate the camera and check that the indicator light
(6) of the hydraulic oil temperature (6) indicates the correct
value.
Display (A) when temperature is proper: Caution lamp
background (C) is blue.
Display (B) when temperature is low: Caution lamp back-
ground (C) is white.
MACHINE OPERATIONS AND CONTROLS
WENAM00061
RKA48500
RKA48670
RKA48670
3-161