Long-Term Storage - Komatsu PW98MR-10 Operation & Maintenance Manual

HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
• Is the selector valve in the dirt cover set to the position for
the breaker?
• Is lock bar (2) for the selector valve in the dirt cover instal-
led to the position for the breaker?
• Do you replace the hydraulic oil and its filter element at intervals shorter than the standard?
The deterioration of the hydraulic oil when using the breaker is much faster than in the normal operations,
so check the maintenance time with "MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER (4-11)".
When considering whether it is necessary to install an accumulator for the attachment circuit, contact the
attachment manufacturer and then decide.
When handling the breaker, follow the instruction manual from the breaker manufacturer and use the break-
er correctly.
METHOD FOR OPERATING GENERAL ATTACHMENT SUCH AS CRUSHER ETC
Operate attachment 1 proportional switch.
The attachment operates.
CHECK POINTS WHEN USING GENERAL ATTACHMENT SUCH AS CRUSHER
ETC
• Is the working mode ATT/P or ATT/E?
• Is the selector valve in the dirt cover set to the position for
general attachment such as crusher?
• Is lock bar (2) for the selector valve in the dirt cover instal-
led to the position for general attachment such as crusher?
For other precautions when handling the attachment, follow the instruction manual from the attachment
manufacturer and use the attachment correctly.

LONG-TERM STORAGE

NOTICE
If you set the working mode to BREAKER/ATTACHMENT and operate the switch while no breaker and no
general attachment are installed, the machine may overheat.
If the equipment is not to be used for a long time, do as follows.
6-18
WENAM00061
ATTACHMENTS AND OPTIONS
RKA48500