Komatsu PW98MR-10 Operation & Maintenance Manual page 153

OPERATION
When the starting switch is ON and "SKIP" is selected, "****" is
displayed in the column of "Operator ID" on "Monitor Setting"
menu screen.
1.
Select operator ID (5) on "Monitor Setting" menu screen,
then press switch F6 for 1 second.
2.
"Operator ID Change" screen is displayed.
• Input the already registered ID on "Operator ID
Change" screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to "Monitor Setting" menu screen.
On "Monitor Setting" menu screen, the inputted ID is
displayed in the column of "Operator ID".
• When you press switch F1 on "Operator ID Change"
screen, a message is displayed below and the screen
returns to "Monitor Setting" menu screen.
On "Monitor Setting" menu screen, as the same way
when the starting switch is ON and "SKIP" is selected,
"****" is displayed in the column of "Operator ID".
In this case, "Operator ID" is not identified.
WENAM00061
EXPLANATION OF COMPONENTS
3-85