SAFETY LABELS
(4) Warning when swinging or travelling in reverse
(09833-A0881)
k
k
•
Before moving, check the surrounding areas, the rear-
view mirror and the monitor to make sure no-one is
near the machine. Failure to do so may result in seri-
ous injury or death.
(5) Caution for blast jobsite
(09845-00640)
Caution of an explosive hazard caused by active radio transmitter at a blast zone.
•
Keep machine at a safe distance from blast zone and a
detonator.
(6) Warning for handling ROPS
(09620-J2001, 09620-A3001)
•
If any modification is applied to the ROPS, it may affect the
strength and may not comply with the standard.
•
ROPS may provide less protection if it has been structural-
ly damaged or involved in roll-over.
•
Always wear seat belt when moving.
(7) Caution for handling accumulator and gas spring
(09659-A057B)
•
There is a hazard of explosion causing injury.
•
Do not disassemble the accumulator, make holes in it,
weld it, cut it, roll it or bring it near a flame.
(8) Caution for handling cable
(09808-A0881)
•
Sign indicates an electric hazard from handling the cable.
•
Read manual for safe and proper handling.
2-10
WARNING
WENAM00061
SAFETY