Precautions For Operation - Komatsu PW98MR-10 Operation & Maintenance Manual

MACHINE OPERATIONS AND CONTROLS
GROUND WHOLE THE BOTTOM SIDE OF BLADE TO SUPPORT MACHINE
When using the blade as an outrigger, never support the ma-
chine with only one end of the blade.

PRECAUTIONS FOR OPERATION

PRECAUTIONS FOR TRAVELING
Traveling over boulders, tree stumps, or other obstacles will
cause a big shock to the chassis (and in particular to the under-
carriage), and this will cause damage to the machine. For this
reason, always remove any obstacles or drive the machine
around them, or take other steps to avoid traveling over such
obstacles as far as possible.
If there is no way to avoid traveling over an obstacle, reduce
the travel speed, keep the work equipment close to the ground,
and try to drive the machine so that the center of the wheels
passes over the obstacle.
PRECAUTIONS FOR HIGH SPEED TRAVEL
On uneven roads, like rocky surfaces or roads with rocks, drive at a slow speed to avoid losing control of the
machine.
• Press the low speed selection key (1) to select the re-
quired speed. The speed is displayed on the indicator light
(2).
3-178
WENAM00061
OPERATION
RKA48157