Komatsu PW98MR-10 Operation & Maintenance Manual page 242

MACHINE OPERATIONS AND CONTROLS
Working mode
Normal digging or loading operations
P mode
(production conscious operation)
Normal digging or loading operations
E mode
(fuel consumption conscious operation)
Aligning or lifting operations (fine control op-
L mode
eration)
B mode Breaker operations
Operations of double-acting attachment on
crusher
ATT/P mode
(production conscious operation)
Operations of double-acting attachment on
crusher
ATT/E mode
(fuel consumption conscious operation)
NOTICE
If breaker operations are performed in a mode other than the breaker mode, there is danger of breakage
of the hydraulic equipment. Do not perform breaker operations in any mode except the breaker mode.
1.
Press working mode selector switch (1).
The screen changes to "working mode" selection screen.
2.
Press the working mode selector switch or, function switch
F3 or F4 to select the appropriate mode.
3.
Select a desired working mode and press function switch
F6.
The change is entered and the screen returns to the stand-
ard screen.
If function switch F5 is pressed, the screen returns to the
standard screen without changing the mode.
• If a working mode is selected, and nothing is done for
5 seconds, the selected working mode is automatically
accepted and the screen returns to the standard
screen.
• If a working mode is selected and working mode switch (1) is kept pressed, the selected mode is ac-
cepted and the screen returns to the standard screen.
3-174
Applicable operations
WENAM00061
OPERATION
RKA48800
RKA48810