Komatsu PW98MR-10 Operation & Maintenance Manual page 173

OPERATION
To cancel the lock, return the lock lever to LOCK position (L),
check that each control lever and the attachment switch are in
neutral, and then release the lock lever again.
TRAVEL PEDAL
• Before operating the drive pedal, make sure that the top turret is facing the oscillating front axle; if
the tower is turned 180°, the controls are inverted.
• Before moving the machine, make sure that the parking brake has been released, that the swing
axle is free to oscillate and that all the safety locks have been engaged.
• Non-compliance with these rules may lead to serious accidents.
Select the forward (F) or backward (R) direction with the selec-
tor switch on the right joystick.
Operate the pedal gradually, in order to avoid abrupt move-
ments of the machine, and regulate the speed using the hand
accelerator.
REMARK
Using the pedal sounds an alarm signalling the machine is
about to move.
The alarm is disabled when moving in travelling on street
mode.
STEERING WHEEL COLUMN POSITION ADJUSTER
The position of the steering column can be adjusted forwards
and backwards by pressing the pedal, shifting the column to
the desired position and releasing the pedal.
k k
WARNING
WENAM00061
EXPLANATION OF COMPONENTS
RKA48490
RKA48560
RKA48561
3-105