Komatsu PW98MR-10 Operation & Maintenance Manual page 121

OPERATION
BLADE/OUTRIGGERS SELECTOR SWICTH
On machines equipped with blade/outriggers, press button F2
to access the outriggers selection screen.
REMARK
The blade and the outriggers are controlled from the right joy-
stick. For more details, see "BLADE/OUTRIGGERS CONTROL
SWITCH (3-96)" and "WORK EQUIPMENT CONTROL LEV-
ERS (3-108)"
On machines in which the outriggers and the blade are not
present, no icon is displayed above button F2.
In machines that just have the front blade or the rear blade,
there is no need to select the attachment, but the control is car-
ried out directly with the blade control switch on the right joy-
stick.
If no button is activated for more than 5 seconds, the monitor
returns to the initial screen, maintaining the settings.
• When the indicator has a grey background: the attachment is not selected.
• When the indicator has a blue background: the attachment is selected.
• When the indicator has a green background: the attachment is operating.
In the outriggers/blade mode screen it is possible to carry out the operations through buttons from F1 to F6.
Machine with front and rear outriggers
Press button F1 to use the front left outrigger.
Press button F2 to use the front right outrigger.
Press button F3 to use the rear left outrigger.
Press button F4 to use the rear right outrigger.
Press button F5 to simultaneously use all outriggers.
Press button F6 to return to the initial screen.
To deselect, press the key corresponding to the attachment
(keys F1 to F4).
Machine with front blade and rear outriggers
Press button F1 to use the front blade.
Press button F3 to use the rear left outrigger.
Press button F4 to use the rear right outrigger.
Press button F5 to simultaneously use blade and outriggers.
Press button F6 to return to the initial screen.
To deselect, press the key corresponding to the attachment
(keys F1, F3, F4).
WENAM00061
EXPLANATION OF COMPONENTS
RKA48174
RKA52170
RKA52180
3-53