Komatsu PW98MR-10 Operation & Maintenance Manual page 211

OPERATION
Adjust the angle of the rear view camera so that people within
1 m away from the machine's rear part (W) appears in the ma-
chine monitor at the operator's seat.
If the image on the monitor is not aligned correctly, adjust
mounting angle (A) of the rear view camera in the following
procedure.
Angle (A) can be adjusted within the range from 30 to 60 deg.
1.
Insert a flat-head screwdriver into hole (3) of bolt cover (2)
and remove bolt cover (2) while pressing the internal claw.
MACHINE OPERATIONS AND CONTROLS
WENAM00061
RKA48620
RKA50410
RKA48630
3-143