OPERATION
METHOD FOR ADJUSTING
METHOD FOR ADJUSTING OPERATOR'S SEAT
When adjusting the position of the operator's seat, always set the lock lever to LOCK position to pre-
vent any accidental contact with the control levers.
•
Always adjust the operator's seat before starting each operation or when the operators change shift.
•
Adjust the operator's seat so that control levers and switches can be operated freely and easily with the
operator's back against the backrest.
Adjusting reclining (A)
Pull up lever (1) and set the seat back to a correct position,
then release lever (1).
Fore-and-aft reclining adjusting: 100 mm (10 stages)
Adjusting seat tilt
•
Forward tilt
MACHINE OPERATIONS AND CONTROLS
k
k
WARNING
WENAM00061
RKA52840
3-137