Komatsu PW98MR-10 Operation & Maintenance Manual page 80

EXPLANATION OF COMPONENTS
BASIC OPERATION OF MACHINE MONITOR WHEN STARTING SWITCH IS ON
WHILE OPERATOR ID INPUT IS SET
• If "ID Number Input (with SKIP)" for "Operator ID Setting" is set, the opening screen GG switches to "Opera-
tor ID Input" (with SKIP) when the starting switch is turned to ON position.
• If "ID Number Input (without SKIP)" for "Operator ID Setting" is set, the opening screen GG switches to
"Operator ID Input" (without SKIP) when the starting switch is turned to ON position.
• On "Operator ID Input" (with SKIP) screen LL or "Operator
ID Input" (without SKIP) screen MM, input the already reg-
istered ID number, and press switch F6. The screen
changes to "Check Before Starting screen" BB. If you input
an incorrect ID number, press switch F5, and clear an in-
put character at a time.
On "Operator ID Input " screen LL (without SKIP), press
switch F1, and the screen changes to Check Before Start-
ing screen BB without inputting ID number.
REMARK
• Contact your Komatsu distributor for details of the method
of setting, changing, or cancelling the operator identifica-
tion function.
• Depending on the set value of "Operator ID Holding Time
with Key OFF" for Operator ID Function Setting function,
even when operator ID of "Operator ID Setting" has been
inputted, "Operator ID Input" (with SKIP) screen LL or "Op-
erator ID Input" (without SKIP) MM screen may not be dis-
played when the starting switch is turned to ON position.
3-12
WENAM00061
OPERATION
RKA47670