Komatsu PW98MR-10 Operation & Maintenance Manual page 118

EXPLANATION OF COMPONENTS
TRAVEL SPEED REDUCTION SWITCH
The travel speed reduction selector switch is used to change the speed in turn from "HI" to "LO" to "CR".
Every time it is pressed the selected speed decreases until the
lowest speed is reached "CR".
"CR" (creep): slow speed (Max 4 km/h)
"LO" (low): low speed (Max 10 km/h)
"HI" (high): high speed (Max 30 km/h)
REMARK
When the engine is started, the selected speed remains the
same as the one set before the machine stopped.
During loading and unloading operations from a trailer always
use the speed "CR".
Before switching the travel speed from "HI" to "LO" and vice-
versa, the machine must be at a standstill and with the service
brake pressed.
The passage from "LO" to "CR" can be carried out at any time.
If the service brake is not pressed correctly, the warning indica-
tor shown in the figure is displayed on the monitor.
3-50
WENAM00061
OPERATION
RKA47912
RKA48153
RKA52160