Komatsu PW98MR-10 Operation & Maintenance Manual page 116

EXPLANATION OF COMPONENTS
1.
When the auto-deceleration switch is pressed and the au-
to-deceleration function is turned ON, the mode is dis-
played in the center of the monitor display, and after 2 sec-
onds, the screen returns to the standard screen.
2.
On the standard screen, auto-deceleration indication lamp
lights up.
(When the auto-deceleration is OFF, the indication lamp
goes out.)
SWITCH FOR INCREASING TRAVEL SPEED
The travel speed increase selector switch is used to change the speed in turn from "CR" to "LO" to "HI".
Every time it is pressed the selected speed increases until the
maximum speed is reached "HI".
"CR" (creep): slow speed (Max 4 km/h)
"LO" (low): low speed (Max 10 km/h)
"HI" (high): high speed (Max 30 km/h)
3-48
WENAM00061
OPERATION
RKA48171
RKA48161
RKA47911