Komatsu PW98MR-10 Operation & Maintenance Manual page 287

OPERATION
3.
Set the lock lever to LOCK position (L).
4.
Stop the engine.
5.
Check that there is nothing around the operator's seat, and then get off the machine.
Close the cab door and front window securely.
6.
Connect the hoisting means and check that no cable or chain will interfere with the machine.
NOTICE
The lifting points are symmetrical.
7.
After the machine comes off the ground, check the hook condition and the lifting posture, and then sling the
machine slowly.
Lifting the machine without outriggers and blade
The pins used for lifting must be fit in their seat with screws or safety pins cotter.
1.
Turn the rotating support to the middle of the lifting points.
2.
Mount pins (1) suited in the holes shown and fit them in
seat with screws or safety pins cotter.
3.
Hook up the chains to the pins.
Lifting the machine with outriggers
Hook up the chain to the booms of the outriggers (2) as shown.
k k
WARNING
WENAM00061
TRANSPORTATION
RKA52590
3-219