Checks Before Starting; Every 100 Hours Maintenance; Method For Lubricating Bucket Fulcrum - Komatsu PW98MR-10 Operation & Maintenance Manual

MAINTENANCE
1.
Place the supplied lever (A) on the release device (1).
2.
Push the lever and give it a solid blow to unblock the nega-
tive brake.
After recovering the standard configuration of the circuit no more adjustments are necessary.

CHECKS BEFORE STARTING

For the following items, see OPERATION, "METHOD FOR CHECKING BEFORE STARTING (3-126)" and
"METHOD FOR WALK-AROUND CHECK (3-125)".
• Method For Draining Water and Sediment From Fuel Tank
• Method For Checking Dust Indicator
• Method For Checking Water Separator, Draining Water and Sediment
• Method For Checking Oil Level In Hydraulic Tank, Adding Oil
• Method For Checking Coolant Level, Adding Coolant
• Method For Checking Oil Level In Engine Oil Pan, Adding Oil
• Method For Checking Electric Wiring
• Method For Checking Fuel Level, Adding Fuel
• Method For Checking Lamp
• Method For Checking Horn
• Check the conditions of tyres and wheel rims.

EVERY 100 HOURS MAINTENANCE

METHOD FOR LUBRICATING BUCKET FULCRUM

NOTICE
If any unusual noise is generated from any greasing point, perform greasing regardless of the greasing
interval.
Perform greasing every 10 hours for the first 50 hours operation on a new machine.
After the machine is subjected to digging work in the water, be sure to grease the wet pins.
Prepare a grease pump.
WENAM00061
MAINTENANCE PROCEDURE
RKA51850
4-35