Komatsu PW98MR-10 Operation & Maintenance Manual page 285

OPERATION
5.
Set the lock lever to FREE position (F).
6.
Set the slow speed (CR).
For detail, see "SWITCH FOR INCREASING TRAVEL
SPEED (3-48)".
7.
Turn auto-deceleration switch OFF and operate the fuel control dial to set the engine to low speed.
Each time auto-deceleration switch is pressed, it switches OFF to ON to OFF in turn.
When auto-deceleration switch is turned OFF, the auto-de-
celeration pilot lamp goes out.
8.
Raise the work equipment, curl the arm under the boom,
then move the machine slowly.
9.
When the machine is horizontal on the top of the rear end
of the trailer, stop the machine.
WENAM00061
TRANSPORTATION
RKA48158
RKA48151
3-217