Komatsu PW98MR-10 Operation & Maintenance Manual page 208

MACHINE OPERATIONS AND CONTROLS
PROCEDURE FOR ADJUSTING MACHINE LEFT FRONT MIRRORS (A) AND (A1)
Adjust the mirror support in a way that will enable you to see the people in the rear left hand side with the mirror
(A) and in the lateral front right hand side with the mirror (A1).
1.
If the mirror is removed, install it to the position shown in
the figure.
(E): approx. 150 mm
Distance from ground of mirror (A): 2390 mm
Distance from ground of mirror (A1): 2320 mm
Fix mirror securing stay (1) the way the side view mirror
stretches outward to the maximum.
2.
Rotate the support (1) of the mirrors so that it is perpendic-
ular in relation to the cabin.
3.
Adjust the mirror (A) so that the side of the machine is re-
flected in the mirror as shown in the figure.
4.
Adjust the mirror (A1) in a way that will enable to view all
the front of machine.
PROCEDURE FOR ADJUSTING MACHINE RIGHT FRONT MIRROR (B)
1.
Rotate the support of rear view mirror (B) so that it is per-
pendicular in relation to the machine.
2.
Adjust the front right mirror in a way that will enable the
driver sitting in his/her seat to view the right hand side of
the machine and any people or objects on the side.
3-140
WENAM00061
OPERATION
RKA54080