Method For Parking Machine - Komatsu PW98MR-10 Operation & Maintenance Manual

OPERATION

METHOD FOR PARKING MACHINE

k k
• Place the machine on a firm and level place.
Do not park the machine on a slope.
If it is unavoidably necessary to park the machine on a
slope, put blocks under the wheels. As an additional
safety measure, thrust the bucket into the ground.
• If the control lever is touched by accident, the machine
may move suddenly, and this may lead to a serious
personal injury or death. Always set the lock lever se-
curely to LOCK position before leaving the operator's
seat.
• Lower the blade and/or the outriggers to the ground
on the downhill side.
• Check that the turret is facing the oscillating front axle
and align the turret with the lower chassis to get down
from the machine using the steps and the handles.
1.
Place the outriggers, the blade and the bucket on the
ground; should space not make this possible, the working
equipment must be placed in transport position.
2.
Turn fuel control dial (1) to Low idle (MIN) position and
lower the engine speed.
3.
Set the switch (2) for gear selection to neutral.
WARNING
WENAM00061
MACHINE OPERATIONS AND CONTROLS
RKA48657
RKA48490
3-189