Komatsu PW98MR-10 Operation & Maintenance Manual page 203

OPERATION
3.
Release the lock (1) and open the cover (2).
4.
Open the right hand side door (3).
5.
Remove the filling hose (4).
6.
Remove the plug of the fitting (5) inside the side bonnet (3)
and connect the filling tube (4) to the fitting. Check if the
valve is open and put the free end of the refilling hose in
the container for fuel.
7.
Press the button (6) to start filling and press it again to in-
terrupt it.
When the floating switch reaches its maximum level, the
pump stops automatically.
If the button (6) is not pressed to interrupt the filling or the
fuel in the barrel is depleted, after ten minutes the pump
stops automatically.
8.
Add fuel.
Fuel tank capacity: 125 ℓ
9.
Check the vent hole (5) and, if necessary, clean it to pre-
vent the pressure in the tank dropping and to allow the fuel
to flow properly.
MACHINE OPERATIONS AND CONTROLS
WENAM00061
RKA54141
3-135