Enabling The Nqa Client; Configuring Nqa Operations On The Nqa Client; Nqa Operation Configuration Task List - H3C SR6600-X Configuration Manual

To configure the NQA server:
Step
1. Enter system view.
2. Enable the NQA server.
Configure a TCP or UDP
3.
listening service.

Enabling the NQA client

Step
1. Enter system view.
2. Enable the NQA client.

Configuring NQA operations on the NQA client

NQA operation configuration task list

Tasks at a glance
(Required.) Perform at least one of the following tasks:
•
Configuring the ICMP echo operation
•
Configuring the DHCP operation
•
Configuring the DNS operation
•
Configuring the FTP operation
•
Configuring the HTTP operation
•
Configuring the UDP jitter operation
•
Configuring the SNMP operation
•
Configuring the TCP operation
•
Configuring the UDP echo operation
•
Configuring the UDP tracert operation
•
Configuring the DLSw operation
•
Configuring the path jitter operation
(Optional.)
(Optional.)
Configuring optional parameters for the NQA operation
Configuring the collaboration function
Command
system-view
nqa server enable
•
TCP listening service:
nqa server tcp-connect ip-address
port-number [ vpn-instance
vpn-instance-name ] [ tos tos ]
•
UDP listening service:
nqa server udp-echo ip-address
port-number [ vpn-instance
vpn-instance-name ] [ tos tos ]
Command
system-view
nqa agent enable
1 1
Remarks
N/A
By default, the NQA server
is disabled.
You can set the ToS value
in the IP header of reply
packets sent by the NQA
server. The default ToS
value is 0.
Remarks
N/A
By default, the NQA client is enabled.