Table of Contents
Advertisement
CERTIFICATION
SCOPE OF MANUAL
To ensure full system quality, Beckman Coulter Spinchron™ DLX
centrifuges are manufactured in a registered ISO 9001 or 13485
facility. They have been designed and tested to be compliant (when
used with Beckman Coulter rotors) with the laboratory equipment
requirements of applicable regulatory agencies. Declarations of
conformity and certificates of compliance are available at
www.beckmancoulter.com.
International symbols that may be displayed on the centrifuge are
illustrated and described on the inside front cover of this manual.
This manual is designed to familiarize you with the Beckman Coulter
Spinchron DLX centrifuge, its functions, specifications, operation,
and routine operator care and maintenance. We recommend that you
read this entire manual, especially the
safety-related information, before operating the centrifuge or
performing instrument maintenance.
➠
NOTE
A magnetized document holder (964987) is
available, which can be attached to either side
of the centrifuge for convenient storage of this
manual, as well as applicable rotor manuals.
The rotor tie-down torquing bar (356036) and
emergency latch release hex wrench (929317)
can also be kept in the document holder for
easy access.
Introduction
and all
SAFETY NOTICE
vii
Advertisement
Table of Contents
