Table of Contents
Advertisement
KVM over IP User Manual
product categories expected to adhere to this class include (but are not
limited to) Voice / Media Gateways, Conference Bridges, Media Servers,
and similar.
Discovery services defined in this class include media-type-specific
network layer policy discovery.
LLDP-MED Communication Endpoint (Class III):
The LLDP-MED Communication Endpoint (Class III) definition is
applicable to all endpoint products that act as end user communication
appliances supporting IP media. Capabilities include all of the capabilities
defined for the previous Generic Endpoint (Class I) and Media Endpoint
(Class II) classes, and are extended to include aspects related to end user
devices. Example product categories expected to adhere to this class
include (but are not limited to) end user communication appliances, such
as IP Phones, PC-based softphones, or other communication appliances
that directly support the end user.
Discovery services defined in this class include provision of location
identifier (including ECS / E911 information), embedded L2 switch
support, inventory management.
LLDP-MED Capabilities:
LLDP-MED Capabilities describes the neighborhood unit's LLDP-MED
capabilities. The possible capabilities are:
1. LLDP-MED capabilities
2. Network Policy
3. Location Identification
4. Extended Power via MDI - PSE
5. Extended Power via MDI - PD
6. Inventory
7. Reserved
Application Type:
Application Type indicating the primary function of the application(s) defined
for this network policy, advertised by an Endpoint or Network Connectivity
Device. The possible application types are shown below.
1. Voice - for use by dedicated IP Telephony handsets and other similar
appliances supporting interactive voice services. These devices are typically
56
Advertisement
Table of Contents
