Table of Contents
Advertisement
Chapter 6. VLAN Management
7. If you want to cancel the setting then you need to click the Reset button. It
will revert to previously saved values.
Parameter description:
Mode:
Indicates the Voice VLAN mode operation. We must disable MSTP feature
before we enable Voice VLAN. It can avoid the conflict of ingress filtering.
Possible modes are:
on: Enable Voice VLAN mode operation.
off: Disable Voice VLAN mode operation.
VLAN ID:
Indicates the Voice VLAN ID. It should be a unique VLAN ID in the system
and cannot equal each port PVID. It is a conflict in configuration if the value
equals management VID, MVR VID, PVID etc. The allowed range is 1 to
4095.
Aging Time:
Indicates the Voice VLAN secure learning aging time. The allowed range is 10
to 10000000 seconds. It is used when security mode or auto detect mode is
enabled. In other cases, it will be based on hardware aging time. The actual
aging time will be situated between the [age_time; 2 * age_time] interval.
Traffic:
Indicates the Voice VLAN traffic class. All traffic on the Voice VLAN will
apply this class.
Port:
The switch port number of the Voice VLAN port.
Port Mode:
Indicates the Voice VLAN port mode. Possible port modes are:
Disabled: Disjoin from Voice VLAN.
Auto: Enable auto detect mode. It detects whether there is VoIP phone attached
to the specific port and configures the Voice VLAN members automatically.
Forced: Force join to Voice VLAN.
This field will be read only if STP feature is enabled. And the STP port mode
will be readonly if this field be set to the mode other than Disabled.
143
Advertisement
Table of Contents
