Chapter 7. Quality of Server (QoS)
Enabled:
To evoke which Port you need to enable the QoS Ingress Port Policers function.
Rate:
To set the Rate limit value for this port, the default is 1000000.
Unit:
Controls the unit of measure for the port policer rate as kbps, Mbps, fps or kfps.
Flow Control:
If flow control is enabled and the port is in flow control mode, then pause
frames are sent instead of discarding frames.
Buttons
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
153