Table of Contents
Advertisement
KVM over IP User Manual
IPv6: The QCE will match only IPV6 frames.
Action:
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
Possible actions are:
CoS: Classify Class of Service.
DPL: Classify Drop Precedence Level.
DSCP: Classify DSCP value.
PCP: Classify PCP value.
DEI: Classify DEI value.
Policy: Classify ACL Policy number.
Modification Buttons :
You can modify each QCE (QoS Control Entry) in the table using the
following buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the QCE listings.
Port Members:
Check the checkbox button to include the port in the QCL entry. By default all
ports are included.
Key Parameters:
Key configuration is described as below:
DMAC Destination MAC address: Possible values are 'Unicast', 'Multicast',
'Broadcast', 'Specific' (xx-xx-xx-xx-xx-xx) or 'Any'.
SMAC Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'.
Tag Value of Tag field can be 'Untagged', 'Tagged', 'C-Tagged', 'S-Tagged' or
'Any'.
VID Valid value of VLAN ID can be any value in the range 1-4095 or 'Any';
user can enter either a specific value or a range of VIDs.
PCP Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5,
6-7, 0-3, 4-7) or 'Any'.
DEI Valid value of DEI can be '0', '1' or 'Any'.
176
Advertisement
Table of Contents
