Table of Contents
Advertisement
Chapter 12. Security
3. Specify the VLAN ID, Log Type.
4. Click Apply.
5. Click First Entry/Next Entry to change Entry.
Parameter description:
Navigating the VLAN Configuration
Each page shows up to 9999 entries from the VLAN table, default being 20,
selected through the "entries per page" input field. When first visited, the web
page will show the first 20 entries from the beginning of the VLAN Table. The
first displayed will be the one with the lowest VLAN ID found in the VLAN
Table.
The "VLAN" input fields allow the user to select the starting point in the
VLAN Table. Clicking "Refresh" the button will update the displayed table
starting from that or the closest next VLAN Table match. The "Next Entry"
will use the next entry of the currently displayed VLAN entry as a basis for the
next lookup. When the end is reached the warning message is shown in the
displayed table. Use the "First Entry" button to start over.
VLAN Mode Configuration:
Specify ARP Inspection is enabled on which VLANs. First, you have to enable
the port setting on Port mode configuration web page. Only when both Global
Mode and Port Mode on a given port are enabled, ARP Inspection is enabled
on this given port. Second, you can specify which VLAN will be inspected on
VLAN mode configuration web page. The log type also can be configured on
per VLAN setting.
Possible types are:
None: Log nothing.
Deny: Log denied entries.
303
Advertisement
Table of Contents
