KVM over IP User Manual
4. If you want to cancel the setting then you need to click the Reset button. It
will revert to previously saved values.
Parameter description:
Start from Vlan:
You can click them Refreshes the displayed table starting from the "VLAN"
input fields.
Delete:
Check to delete the entry. The designated entry will be deleted during the next
save.
VLAN ID:
It displays the VLAN ID of the entry.
Snooping Enabled:
Enable the per-VLAN IGMP Snooping. Only up to 32 VLANs can be selected.
IGMP Querier:
Enable to join IGMP Querier election in the VLAN. Disable to act as an IGMP
Non-Querier.
Compatibility:
Compatibility is maintained by hosts and routers taking appropriate actions
depending on the versions of IGMP operating on hosts and routers within a
network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced
IGMPv2, Forced IGMPv3, default compatibility value is IGMP-Auto.
Rv:
Robustness Variable. The Robustness Variable allows tuning for the expected
packet loss on a network. The allowed range is 1 to 255; default robustness
variable value is 2.
QI(sec):
Query Interval. The Query Interval is the interval between General Queries
sent by the Querier. The allowed range is 1 to 31744 seconds; default query
interval is 125 seconds.
QRI(0.1 sec):
Query Response Interval. The Max Response Time used to calculate the Max
Resp Code inserted into the periodic General Queries. The allowed range is 0
214