Table of Contents
Advertisement
KVM over IP User Manual
4. Specify the information to include in the TLV field of advertised
messages.
5. Click Apply.
Parameter description:
LLDP Parameters
Tx Interval:
The switch periodically transmits LLDP frames to its neighbors for having the
network discovery information up-to-date. The interval between each LLDP
frame is determined by the Tx Interval value. Valid values are restricted to 5 -
32768 seconds.
Tx Hold:
Each LLDP frame contains information about how long the information in the
LLDP frame shall be considered valid. The LLDP information valid period is
set to Tx Hold multiplied by Tx Interval seconds. Valid values are restricted to
2 - 10 times.
Tx Delay:
If some configuration is changed (e.g. the IP address) a new LLDP frame is
transmitted, but the time between the LLDP frames will always be at least the
value of Tx Delay seconds. Tx Delay cannot be larger than 1/4 of the Tx
Interval value. Valid values are restricted to 1 - 8192 seconds.
Tx Reinit:
When a port is disabled, LLDP is disabled or the switch is rebooted, an LLDP
shutdown frame is transmitted to the neighboring units, signaling that the
LLDP information isn't valid anymore. Tx Reinit controls the amount of
seconds between the shutdown frame and a new LLDP initialization. Valid
values are restricted to 1 - 10 seconds.
LLDP Port Configuration
The LLDP port settings relate to the currently selected, as reflected by the page
header.
Port:
The switch port number of the logical LLDP port.
Mode:
Select LLDP mode.
38
Advertisement
Table of Contents
