Chapter 7. Quality of Server (QoS)
Web Interface
To configure the DSCP –Based QoS Ingress Classification parameters in the
web interface:
1. Click Quality of Service, DSCP and DSCP-Based QoS.
2. Evoke to enable or disable the DSCP for Trust.
3. Scroll to select Queue Priority and DPL parameters.
4. Click the save to save the setting.If you want to cancel the setting then you
need to click the Reset button. It will revert to previously saved values.
Parameter description:
DSCP:
Maximum number of support ed DSCP values are 64.
Trust:
Click to check if the DSCP value is trusted.
Queue Priority:
Queue Priority value can be any between 0 and 7. 7 is the highest.
DPL:
Drop Precedence Level (0-3)
171