Table of Contents
Advertisement
KVM over IP User Manual
Web Interface
To display the MVR Groups Information in the web interface:
1. Click Multicast, MVR and Groups Information.
2. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh".
3. Click "Refresh" to refresh the entry of the MVR Groups Information.
4. Click First/Next Page to change page.
Parameter description:
Navigating the MVR Channels (Groups) Information Table
Each page shows up to 99 entries from the MVR Group table, default being 20,
selected through the "entries per page" input field. When first visited, the web
page will show the first 20 entries from the beginning of the MVR Channels
(Groups) Information Table.
The "Start from VLAN", and "Group Address" input fields allow the user to
select the starting point in the MVR Channels (Groups) Information Table.
Clicking the Refresh button will update the displayed table starting from that
or the closest next MVR Channels (Groups) Information Table match. In
addition, the two input fields will - upon a Refresh button click - assume the
value of the first displayed entry, allowing for continuous refresh with the same
start address.
240
Advertisement
Table of Contents
